AutoSparge™

Where can I get a replacement hose for my AutoSparge?
You can work with our local Blichmann retailer to order the hose. You can also purchase one on the Blichmann Engineering Replacement Parts site at the l...
Fri, 20 Nov, 2015 at 11:08 AM
I have an older AutoSparge and want to upgrade to the stainless steel float ball. How can I get one?
You can work with our local Blichmann retailer to order one. You can also purchase one on the Blichmann Engineering Replacement Parts site at the link b...
Fri, 20 Nov, 2015 at 11:09 AM
How do I install the AutoSparge in my own kettle?
How do I install the AutoSparge in my own kettle? With the purchase of the AutoSparge you will receive the owner’s manual and you will find the proper i...
Fri, 20 Nov, 2015 at 11:11 AM
What are the recommend locations for insulation of the AutoSparge in my kettle?
The AutoSparge™ can be easily installed into any kettle or cooler larger than 12" in diameter. Blichmann Engineering also offers optional AutoSparge ...
Fri, 20 Nov, 2015 at 11:12 AM
The float arm of the AutoSparge™ bounces
Bouncing of the float arm and pulsating of the flow is not too common but if it does occur it is easily remedied. This situation is usually caused from inle...
Fri, 20 Nov, 2015 at 11:12 AM
The float arm of the AutoSparge™ does not reach the grain with small batches. What should I do?
Simply set the AutoSparge™ float in the lowest position and allow the hot liquor to rise above the grain until the flow is balanced. It is not a problem t...
Fri, 20 Nov, 2015 at 11:13 AM
Water flows out of the back end of my AutoSparge™. Is this normal?
Yes, it is normal for some water to leak past the sliding piston and drain onto the surface of the grain. We have opened the clearance of this part to preve...
Fri, 20 Nov, 2015 at 11:14 AM
Will the AutoSparge™ plug with grain particles? Can I use the AutoSparge™ with a RIMS system?
Our research and development team has used the AutoSparge™ for several years on our RIMS system and experienced no issues with grain plugging. We specially ...
Fri, 20 Nov, 2015 at 11:14 AM